-
For the control of spider mite
-
More tolerant to high temperatures and low humidity than Phytoseiulus persimilis
-Do not use in tomato.
How it works:
Predatory mites pierce their prey with their sucking mouthparts and suck out the contents.
Product
Pack size | 25,000 predatory mites. |
Presentation | 500 ml bottle. |
Carrier | Vermiculite. |
Directions for use
Application
- Turn and shake the bottle gently before use
- Push the centre of the cap to open the dosage hole
- Sprinkle material on leaves
- Make sure the material remains on the leaves for at least a few hours after introduction
- Can also be applied with (Mini)-Air(o)bug
Dosage
The dosage of Spical depends on climate, crop and pest density and should always be adjusted to the particular situation. Start introduction as soon as the first pest mites are detected in the crop. Introduction rates typically range from 25-125 per m2/release. Releases should be repeated at least five times at weekly intervals. Consult a Koppert advisor or a recognized distributor of Koppert products for advice on the best strategy for your situation.
Environmental conditions
Neoseiulus californicus is most effective at temperatures between 13 and 32°C (55 and 90°F) and is sensitive to relative humidity below 60%.
Combined use
Can be combined with Phytoseiulus persimilis and Feltiella acarisuga.
Precautions
Application of this product can cause sensitization or allergic reactions, we therefore advise to take the necessary precautions.